Snap-on Equipment - Cartec - BDE 4504 N SC - 16 t - Roller brake tester, 16 t axle load

English | Deutsch

Home Our Mission Company Products Contact Brands

back | print | bookmark

BDE 4504 N SC - 16 t - Roller brake tester, 16 t axle load

Key Features

Analogue display, double scale: display range 0-8 / 0-40 kN
Two-part zinc-coated roller set
Rollers with wear-proof plastic coating on welded expanded metal or rollers SmoothGrip (suitable for spiked tyres)
Elevated rear rollers: 50 mm
Splash-proof motors
Rust-proof feeler rolls
Measurement with wear-free strain-gauge type load cells
Electric automatic drive-off aid
Automatic test sequence
Interface for printer / PC
Determination of braking force, braking force imbalance, rolling friction, ovality
Automatic switching in and re-start
Automatic or manuell operation mode
Cut-out at wheel lock
Permanent determination of braking force imbalance
Automatic zero adjustment
Error check routine
Measurement indication for cars and trucks

Specifications

Brake tester Axle weight max. (t)16 Brake tester Roller diameter (mm)255 Brake tester Roller length (mm)1000 Brake tester Roller elevation (mm)50 Brake tester Roller coefficient dry / wet0.9 / 0.5 Brake tester Idling speed (km/h)2.6 Brake tester Temperature range (°C)0 - 70 Brake tester Power supply (V/Hz)400 / 50 Brake tester Supply lead (mm²)5 x 10 Brake tester Fuse rating, slow-blow (A slow-blow)3 x 63 Brake tester Motor power (kW)2 x 11 Brake tester Width (mm)2 x 1210 Brake tester Height (mm)2 x 1270 Brake tester Depth (mm)2 x 640 Brake tester Weight (kg)2 x 700 Display cabinet Measuring range (kN)0 - 8 / 0 - 40 Display cabinet Height (mm)600 Display cabinet Width (mm)800 Display cabinet Depth (mm)200 Display cabinet Weigth (kg)35

Options

Kit 4WD mode
Lifting device HBV 4000
Side-slip tester SSP 4000
Load simulator NSV 4000
Wheel / axle load weighing unit
Safety device for pit installation (Mandatory for use in Germany)
Key-operated main switch, attached externally
Roller cover plates, traversable - plug-in type
Built-in frame to facilitate preparation of foundation
Pedal pressure transducer
Air pressure transducers
Infrared remote control
Column or swivel wall support for display cabinet
2-digit LED for braking force imbalance 0-99%
8-digit LED for axle load weighing system, track, pedal pressure
PC upgrade and PC equipment
SP Software (TAK version)
Tacho Control

Delivery

Analogue display cabinet, display range 0-8/0-40 kN
Roller set
30 m connecting lead

Versions

with brake motors
with two test speeds
230 V / 60 Hz

Components

SSP 4000

Test plate, zinc-coated
Quick diagnosis of the track
Check-up of track toe-in / toe-out

Axle weight max. (t): 20
Height (mm): 70
Width (mm): 800
Depth (mm): 1000
Weight (kg): 153

HBV 4000

The lifting device HBV 4000 can be used - only in conjunction with BDE 4504 16 t / 18 t with 8-sensor wheel load weighing unit - to simulate various axle loads. The mechanics are raised and pressed against the vehicle under test.

Built-in frames (fully hot galvanized) absolutely required for cementing in
Installation of serial roller brake tester BDE 4504 16 t / 18 t with lifting chassis and wheel load weighing system 2 x 4 sensors
Lifting mechanics varnished
Operation via IR remote control possible

Lifting device lifting force max. (t): 14
Lifting device stroke max. (mm): 200
Lifting device lifting time approx. (s): 30
Lifting device lowering time approx. (s): 30
Lifting device weight incl. hydraulic unit (kg): 750
Lifting device height of built-in frame per installation side (mm): 980
Lifting device width of built-in frame per installation side (mm): 1400
Lifting device depth of built-in frame per installation side (mm): 1400
Lifting device weight of built-in frame per installation side (kg): 260
Lifting device hydraulic unit operating pressure (bar): 160
Lifting device hydraulic unit pump rating (l/min): 4.8
Lifting device hydraulic unit motor rating (kW): 1.5

NSV 4000

hydraulic aggregate
hydraulic cylinder
loops
chains with hooks
control cabinet

Designed for the simulation of any axle load thus obtaining the brake pressure under load conditions as well as the travel of the spring system.

In addition, you will be able to check the axle load-controlled braking device on air-suspended vehicles.

Load Simulator max. load simulating force (t): 10
Load Simulator Operating pressure (bar): 150
Load Simulator Stroke max. (mm): 300
Load Simulator Delivery rate (l/min): 5.2
Load Simulator Capacity (l): 17
Load Simulator hydraulic unit height (mm): 500
Load Simulator hydraulic unit width (mm): 395
Load Simulator hydraulic unit depth (mm): 200