Products cartec
product
OEM Recommendations
BDE 2206-PC - Roller brake tester for cars and vans up to 3 t axle load, PC version, Indicating range 0 - 6 kN - CeSil coated rollers, 700 mm long, without display cabinet
- The BDE 2206 brake tester is also available in PC version.
- The entire brake test can be followed up on screen. The PC version offers the following features: Print-out of measured data in a test report, deleting of data and enabling ovality test
- The following measured data can be listed in the test report:
- Rolling resistance for left-hand / right-hand sides
- Braking force of service brake for left-hand / right-hand sides
- Braking force of parking brake for left-hand / right-hand sides
- Ovality for left-hand / right-hand sides
- Braking force imbalance for left-hand / right-hand sides
- Graphical representation on the monitor shows:
- Braking force for left-hand / right-hand sides
- Permanent braking force imbalance
- Indication of service brake or parking brake
- Rimguard reading (position of vehicle on the rollers)
- Indication of axle under test (axle 1 or 2)
Brake tester Axle weight max. (t)3
Brake tester Roller diameter (mm)176
Brake tester Roller length (mm)700
Brake tester Roller coefficient dry / wet> 0.7 / > 0.6
Brake tester Test width min. (mm)800
Brake tester Test width max. (mm)2200
Brake tester Idling speed (km/h)3.3
Brake tester Temperature range (°C)0 - 70
Brake tester Power supply (V/Hz)400 / 50
Brake tester Supply lead (mm²)5 x 2.5
Brake tester Fuse rating, slow-blow (A slow-blow)3 x 16
Brake tester Motor power (kW)2 x 2.5
Brake tester Width (mm)2305
Brake tester Height (mm)205
Brake tester Depth (mm)580
Brake tester Weight (kg)260
- Kit 4WD mode
- Roller cover plates, traversable - hingeable outside or plug-in type
- Built-in frame to facilitate preparation of foundation
- Pedal pressure transducer
- Infrared remote control
- PC equipment (please see the fact sheet PC Requirements for use with your own PC)
- Roller set
- 15 m COM cable from roller set to customer PC
- Software
- with SmoothGrip rollers
BDE 2205
Non-contact detection of the vehicle, No feeler rolls, Analogue display, double scale: display range 0-6 kN, One-part zinc-coated roller set, Idle running speed 3.3 km/h, Motor power 2 x 2.5 kW, Power supply 3/N/PE 400 V AC / 50 Hz
BDE 2205-PC
Non-contact detection of the vehicle, No feeler rolls, Graphical representation on the monitor, One-part zinc-coated roller set, Idle running speed 3.3 km/h, Motor power 2 x 2.5 kW, Power supply 3/N/PE 400 V AC / 50 Hz
BDE 2206
Analogue display, double scale: display range 0-6 kN, One-part zinc-coated roller set, Idle running speed 3.3 km/h, Motor power 2 x 2.5 kW, Power supply 3/N/PE 400 V AC / 50 Hz
