Products cartec
product
OEM Recommendations
BDE 2206 - Roller brake tester for cars and vans up to 3 t axle load, analogue version, Scale range 0 - 6 kN - CeSil coated rollers, 700 mm long
- Rimguard technology
- Intelligent cut-out at wheel lock
- Analogue display, double scale: display range 0 - 6 kN
- One-part zinc-coated roller set
- Rollers with CeSil coating
- Elektronic diagnostic system integrated in the roller set
- Splash-proof motors
- Measurement with wear-free strain-gauge type load cells
- Electric automatic drive-off aid
- Roller drive via rugged flat gear
- Automatic test sequence
- Determination of braking force, braking force imbalance, rolling friction, ovality
- Automatic switching in and re-start
- Cut-out at wheel lock
- Permanent determination of braking force imbalance
- Automatic zero adjustment
- Error check routine
Brake tester Axle weight max. (t)3
Brake tester Roller diameter (mm)176
Brake tester Roller length (mm)700
Brake tester Roller coefficient dry / wet> 0.7 / > 0.6
Brake tester Test width min. (mm)800
Brake tester Test width max. (mm)2200
Brake tester Idling speed (km/h)3.3
Brake tester Temperature range (°C)0 - 70
Brake tester Power supply (V/Hz)400 / 50
Brake tester Supply lead (mm²)5 x 2.5
Brake tester Fuse rating, slow-blow (A slow-blow)3 x 16
Brake tester Motor power (kW)2 x 2.5
Brake tester Width (mm)2305
Brake tester Height (mm)205
Brake tester Depth (mm)580
Brake tester Weight (kg)260
Display cabinet Measuring range (kN)0 - 6
Display cabinet Height (mm)610
Display cabinet Width (mm)460
Display cabinet Depth (mm)80
Display cabinet Weigth (kg)15
- Braking force imbalance indicator
- Kit 4WD mode
- Key-operated main switch, attached externally
- Roller cover plates, traversable - hingeable outside or plug-in type
- Built-in frame to facilitate preparation of foundation
- Pedal pressure transducer
- Infrared remote control
- Column or swivel wall support for display cabinet
- PC upgrade
- Analogue display cabinet, display range 0 - 6 kN
- Roller set
- 15 m connecting lead
- with SmoothGrip rollers
BDE 2205
Non-contact detection of the vehicle, No feeler rolls, Analogue display, double scale: display range 0-6 kN, One-part zinc-coated roller set, Idle running speed 3.3 km/h, Motor power 2 x 2.5 kW, Power supply 3/N/PE 400 V AC / 50 Hz
BDE 2205-PC
Non-contact detection of the vehicle, No feeler rolls, Graphical representation on the monitor, One-part zinc-coated roller set, Idle running speed 3.3 km/h, Motor power 2 x 2.5 kW, Power supply 3/N/PE 400 V AC / 50 Hz
BDE 2206-PC
Graphical representation on the monitor, One-part zinc-coated roller set, Idle running speed 3.3 km/h, Motor power 2 x 2.5 kW, Power supply 3/N/PE 400 V AC / 50 Hz
